The CAM-4900-SW Capping Machine is an efficient, maintenance-free benchtop capper for low to mid-production requirements. The unit cycles at 43 strokes per minute at 60 Hz and 36 strokes per minute when the line frequency is 50 Hz (50 Hz motors are available upon request.) Its dual voltage motor permits operation with either 120 or 240 VAC input. The proven performance of Swan-Matic benchtop Capping Machines begins with a reliable design backed by sturdy machine components. Those components are assembled, placed in a sealed housing and the drive train is submersed in gear oil. Swan-Matic capping machines are recognized world-wide for quality and reliability.

CAM-4912-SW - 120 Volts

CAM-4924-SW - 240 Volts

The CAM-4800-SW capping machine incorporates a variable speed motor for control of critical capping requirements and operator training.

CAM-4812-SW - 120 Volts

CAM-4824-SW - 240 Volts

The air operated CAM-4600-SW provide the ability to cap bottles in hazardous locations or environments. The cycle rate is controlled by increasing or decreasing the air supply, which should be 90 PSI.

CAM-4600-SW - Air Operated 

The CAM-5000-SW Capper is an efficient, maintenance-free benchtop capper for low to mid-production closures that require compression rather than twisting.

CAM-5012-SW - 120 Volts

CAM-5024-SW - 240 Volts

The CAM-6000-SW Benchtop Capper is an efficient, maintenance-free benchtop capper. With 57 strokes per minute at 60 Hz and 48 strokes at 50 Hz, productivity is improved and a close tolerance on measured applied torque is maintained.

CAM-6012-SW - 120 Volts

CAM-6024-SW - 240 Volts

The model CAM-6100-SW variable speed cappers incorporate the convenience of adjustable motor speed with an increased capping speed. At maximum speed, you have up to 57 capping strokes (or cycles) per minute.

CAM-6112-SW - 120 Volts

CAM-6124-SW - 240 Volts

The air operated CAM-6200-SW provide the ability to cap bottles in hazardous locations or environments. The cycle rate is controlled by increasing or decreasing the air supply, which should be 90 PSI.

CAM-6200-SW Air Operated

Options:

• Spindle reversing feature to facilitate de-capping
• Longer columns for up to 15 inch containers
• Foot switch for hands-free operation
• Stainless steel shaft and clutch assemblies
• Precision magnetic hysteresis clutch (accurate to 0.1 in-lbs)
• Special coatings and plating, available for all models used in corrosive capping applications such as pickling, citric Juices and concentrates, and acidic solutions and compounds
• Hazardous location motors
• Adjustable height cart
• Corrosion resistant finish

Click here for more information.